Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Voice Acoustic Paveosub-112 Subwoofer Loudspeakers
The Paveosub-112 is a very compact bass reflex subwoofer intended for universal applications; as a mobile unit or in fixed installations. With a height of only 30 cm, it is the flattest 12″ sub in the world and can be used where high sound pressure and deep working sound are required in constricted spaces.
The 2 x 4 rubber feet on the narrow and the wide sides of the casing, each with stacking notches on opposite sides, guarantee a secure standing and no slipping.
The extremely powerful motor (B / L factor 26) of the high-quality 12″ neodymium chassis guarantees fast and accurate signal reproduction with excellent transient response. The speaker features a large -4″ voice coil, a sophisticated ventilation system and a lower power compression than conventional bass drivers: As a result the amplifier performance is implemented effectively and efficiency is maintained even under permanent full scale use.
Two round handles, accessible from all sides and a detachable front wheel board make for easy handling. Additionally, the Paveosub-112 can be converted in factory to the self-powered version including the 3-channel 4 kW amplifier module and DSP board.
The woofer is in 8 Ω. The Paveosub-112 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.
HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Paveosub-112.
Technical Data
Drivers
1 x 12″ Neodym long excursion woofer with 4″ voice coil
Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)
Impedance
8 Ω active separated
Powerhandling (AES / Program / Peak)
1.000 W / 2.000 W / 4.000 W
Sensitivity 1 W/1 m
96 dB SPL (half space)
Sound pressure at (AES / Program / Peak)
126 dB SPL / 129 dB SPL / 132 dB SPL
Connection
2 x NEUTRIK NL4 IN/OUT 2+/-
Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint
Dimensions / Weight
300 (H) x 520 (W) x 485 mm (D) / 23,1 kg
Dapatkan Informasi & Penawaran Terbaik dengan Menghubungi Kami